Quick Setup |
| |
| Getting Started | Start the Quick Setup by selecting the yellow “Quick Setup” button located on the |
|
| Tact 2.0 S Room Correction software’s main window. |
|
| The Tact 2.0S Quick Setup wizard is broken into three steps. As you complete |
|
| each step select the “NEXT” button proceed to the next step. |
| STEP I | Set the Loudspeaker Lower Cutoff frequency. Your main loudspeaker |
|
| frequency response will determine the setting needed for this parameter. Please |
|
| refer to your main loudspeaker manual for this information. |
-Loudspeaker lower cutoff frequency (this is the lowest frequency that your loudspeakers can reproduce)
STEP II
Do you have one or more M/S 2150 digital amplifier connected to your RCS 2.0S?
30 Tact Audio
-If you do not use Tact digital amplifiers select “No”. Then select the “Next” button and go to Step III.
