TacT Audio RCS 2.0S Delay Level, Amp Rem, Addr, Displ Test, Pol Pareq, Ofs Info, Left, msec, 0.00

					Front Panel Display
MAIN menu	The main menu of the RCS 2.0S has three pages of general menu selections.
	Main Menu :
		DELAY LEVEL	ADC	<- AMP REM	ADDR
		DISPL TEST	OUT ->	POL PAREQ	TONE ->

<- OFS INFO

To enter the Menu selection pages press the “MENU” button. Use the “LEFT” and “RIGHT” navigational buttons to highlight an option with the selection cursor and to proceed to a new page. To enter a highlighted option press the “ENTER” button.

Once you are in a menu option use the “MENU” button to go back one step (from sub-menus) with each press or to return to the main operating screen.

Saving Menu	Custom settings that are made to any of the menu selections can be saved by
Settings	placing the RCS 2.0S into standby mode. If you make changes to any of the menu
	items and turn the unit off before placing it into standby mode all settings will be lost.
	To place the RCS 2.0S into standby mode press STANDBY button found on the front
	panel of the unit or the red “STANDBY” button on the remote control.
DELAY menu	The Delay menu controls the systems time alignment. You can adjust the systems
	time alignment by changing the delay time for the left and right outputs indepen-
	dently.
	Delay Menu :				2
		LEFT		RIGHT	CR:2
					msec
		0.00	0.00
			1
	1 - Individual channel delay time settings.
	2 - Current correction preset. (selectable from the main screen)

Use the “LEFT” and “RIGHT” navigational buttons to highlight an option and use the “UP” and “Down” buttons to change its value .

NOTE: The RCS 2.0S provides a unique set of two delay times (Left and

Right) for each room correction preset including bypass.

NOTE: System balancing is automatically implemented by the room correc- tion software. You would change these parameters only if you needed addi-

tional adjustment.

Tact Audio 17