| Update the RCS 2.0S Firmware |
Step IV: | After updating the firmware the System Files now need to be reprogrammed. |
Reprogram the
RCS 2.0S System Files
1
1 - From the RCS 2.0S software main screen, click on the “Program TacT-2.0 S” button. You should now see the programming window.
2 - Press and hold the “Control” key on your computer keyboard and then press the “S” key simultaneously. This should display the System Option (1) in the bottom center of the programming window.
3 - Left click your mouse in the square next to System to select it with a check mark.
4 - Press the “Program” button and follow the prompts by answering all questions. You will need to be able to answer “Yes” to all questions to start the system file reprogramming. The Program window will display a “programming complete” message when the system is completed.
Tact Audio 35
