Update the RCS 2.0S Firmware

5 - Press and hold the “DIGITAL” and “ANALOG” buttons on the front panel of the RCS 2.0S simultaneously while you turn the unit back ON from the rear-panel mains switch. Hold the buttons until the display shows the “PROGRAMMING MODE” screen.

Tact-2.0 S

Programing Mode

6 - From the TacT 2.0S RCS software main screen, click on Add-Ins and then “Standard”. You should now see the Add-Ins window.

7 - Select the “Program” button and follow the prompts by answering all questions. You will need to be able to answer “Yes” to all questions to start the programming. The RCS 2.0S will turn OFF and the ON and return to normal operation.

34 Tact Audio

Page 34
Image 34
TacT Audio RCS 2.0S owner manual Tact-2.0 S Programing Mode