Roland RS-50 Enhchorus Enhancer→Chorus, Enhflanger Enhancer→Flanger, Enhdelay Enhancer→Delay

33: ENH>CHORUS (Enhancer→Chorus)

This effect connects an enhancer and a chorus in series.

fig.MFX-33

L in	Enhancer						L out
			Mix		Balance D
						Balance W
					Chorus	Balance W
R in							R out
	Enhancer
			Mix		Balance D
Parameter		Value		Description
Enhancer Sens #		0–127		Adjusts the sensitivity of the en-
				hancer.
Enhancer Mix		0–127		Adjusts the ratio with which the
				overtones generated by the en-
				hancer are combined with the
				direct sound.
Cho Delay		0.0–100 [ms]		Adjusts the time delay from
				when the direct sound begins
				until the chorus sound is heard.
Cho Rate		0.05–10.00 [Hz]		Adjusts the modulation speed of
				the chorus effect.
Cho Depth		0–127		Adjusts the modulation depth of
				the chorus effect.
Cho Balance #		D100:0W–		Adjusts the volume balance be-
		D0:100W		tween the enhancer sound that
				is sent through the chorus and
				the enhancer sound that is not
				sent through the chorus.
				With a setting of “D100:0W,”
				only the enhancer sound will be
				output. With a setting of
				“D0:100W,” only the enhancer
				sound that is sent through the
				chorus will be output.
Level		0–127		Adjusts the output level.

34: ENH>FLANGER (Enhancer→Flanger)

This effect connects an enhancer and a flanger in series.

Adding effects

Parameter	Value	Description
Flg Feedback	-98– +98 [%]	Adjusts the proportion (%) of
		the flanger sound that is fed
		back into the effect.
		Negative (-) settings will invert
		the phase.
Flg Balance #	D100:0W–	Adjusts the volume balance be-
	D0:100W	tween the enhancer sound that
		is sent through the flanger and
		the enhancer sound that is not
		sent through the flanger.
		With a setting of “D100:0W,”
		only the enhancer sound will be
		output. With a setting of
		“D0:100W,” only the enhancer
		sound that is sent through the
		flanger will be output.
Level	0–127	Adjusts the output level.

35: ENH>DELAY (Enhancer→Delay)

This effect connects an enhancer and a delay in series.

fig.MFX-35

L in							L out
	Enhancer
			Mix		Balance D
						Balance W
					Delay
						Balance W
					Feedback
R in	Enhancer						R out
			Mix		Balance D
Parameter		Value		Description
Enhancer Sens #		0–127		Adjusts the sensitivity of the en-
				hancer.
Enhancer Mix		0–127		Adjusts the ratio with which the
				overtones generated by the en-
				hancer are combined with the
				direct sound.
Delay Time		0–500 [ms]		Adjusts the time delay from
				when the direct sound begins
				until the delay sound is heard.
Dly Feedback		98– +98 [%]		Adjusts the proportion (%) of
				the delay sound that is fed back

fig.MFX-34

L in Enhancer

Mix

R in Enhancer

Mix

Balance D

L out

Feedback

Balance W

Flanger

Balance W

R out

Balance D

	into the delay input.
	Negative (-) settings will invert
	the phase.
Dly HF Damp 200–8000 [Hz],	Adjusts the frequency above
BYPASS	which delayed sound fed back
	to the delay input will be cut.
	If you do not want to cut the
	high frequencies of the delay
	feedback, set this parameter to
	BYPASS.

Parameter	Value	Description
Enhancer Sens #	0–127	Adjusts the sensitivity of the en-
		hancer.
Enhancer Mix	0–127	Adjusts the ratio with which the
		overtones generated by the en-
		hancer are combined with the
		direct sound.
Flg Delay	0.0–100 [ms]	Adjusts the time delay from
		when the direct sound begins
		until the flanger sound is heard.
Flg Rate	0.05–10.00 [Hz]	Adjusts the modulation speed of
		the flanger effect.
Flg Depth	0–127	Adjusts the modulation depth of
		the flanger effect.

Dly Balance #	D100:0W–	Adjusts the volume balance be-
	D0:100W	tween the enhancer sound that
		is sent through the delay and the
		enhancer sound that is not sent
		through the delay.
		With a setting of “D100:0W,”
		only the enhancer sound will be
		output. With a setting of	Effects
		“D0:100W,” only the enhancer
		sound that is sent through the
		delay will be output.
Level	0–12	Adjusts the output level.

81