Roland RS-50 Choflanger Chorus→Flanger, Chorus/Delay, 40 FLG/DELAY Flanger/Delay, Lofi

38: CHO>FLANGER (Chorus→Flanger)

This effect connects a chorus and a flanger in series.

fig.MFX-38

		Balance D			Balance D
L in							L out
		Balance W			Feedback
						Balance W
	Chorus				Flanger	Balance W
		Balance W
R in							R out
	Balance D
					Balance D
Parameter			Value	Description
Cho Delay			0.0–100 [ms]	Adjusts the time delay from
				when the direct sound begins
				until the chorus sound is heard.
Cho Rate			0.05–10.00 [Hz]	Adjusts the modulation speed of
				the chorus effect.
Cho Depth			0–127	Adjusts the modulation depth of
				the chorus effect.
Cho Balance #			D100:0W–	Adjusts the volume balance be-
			D0:100W	tween the direct sound and the
				chorus sound.
				With a setting of “D100:0W,” only
				the direct sound will be output.
				With a setting of “D0:100W,” only
				the chorus sound will be output.
Flg Delay			0.0–100 [ms]	Adjusts the time delay from
				when the direct sound begins
				until the flanger sound is heard.
Flg Rate			0.05–10.00 [Hz]	Adjusts the modulation speed of
				the flanger effect.
Flg Depth			0–127	Adjusts the modulation depth of
				the flanger effect.
Flg Feedback			-98– +98 [%]	Adjusts the proportion (%) of
				the flanger sound that is fed
				back into the effect.
				Negative (-) settings will invert
				the phase.
Flg Balance #			D100:0W–	Adjusts the volume balance be-
			D0:100W	tween the chorus sound and the
				chorus sound that is passed
				through the flanger.
				With a setting of “D100:0W,” only
				the chorus sound will be output.
				With a setting of “D0:100W,” only
				the chorus sound that passes
				through the flanger will be output.
Level			0–127	Adjusts the output level.

39: CHORUS/DELAY

This effect connects a chorus and a delay in parallel. The parameters are the same as for “36: CHORUS>DELAY.” However, the Dly Balance parameter adjusts the volume balance between the direct sound and the delay sound.

fig.MFX-39
	Balance D
L in	L out
	Chorus
	Balance W
	Feedback
	Balance W
	Delay
R in	R out
	Balance D

Adding effects

40: FLG/DELAY (Flanger/Delay)

This effect connects a flanger and a delay in parallel. The parameters are the same as for “37: FLG>DELAY.” However, the Dly Balance parameter adjusts the volume balance between the direct sound and the delay sound.

41:CHO/FLANGER (Chorus/ Flanger)

This effect connects a chorus and a flanger in parallel. The parameters are the same as for “38: CHO>FLANGER.” However, the Flanger Balance parameter adjusts the volume balance between the direct sound and the flanger sound.

fig.MFX-41

	Balance D
L in	L out
	Chorus
	Balance W
	Feedback
	Balance W
	Flanger
R in	R out
	Balance D

42: LOFI

This effect intentionally degrades the audio quality to simulate a Lo- Fi sound. It is particularly effective on drums.

fig.MFX-42
L in					L out
	Lo-Fi		2-Band EQ
R in					R out
	Lo-Fi		2-Band EQ
Parameter		Value		Description
Bit Down		0–11		This setting lowers the audio
				quality.
				The audio quality will worsen as
				this setting is increased.
S-RateDown		0–7		This coarsens the output signal.
				The sound will become coarser
				as this setting is increased.
Post Gain		0, +6, +12, +18		Adjusts the output signal.
		[dB]
Low Gain		-15– +15 [dB]		Adjusts the gain of the low fre-
				quency.
High Gain		-15– +15 [dB]		Adjusts the gain of the high fre-
				quency.
Output		MONO, STE-		Specifies how the sound will be
		REO		output.
				With a setting of “MONO,” the
				output sound will be monaural.
Level #		0–127		Specifies the output volume
				from the Lo-Fi effect.

Effects

83