
Basic operation of the RS-50
Switching the mode
The
Patch mode
You will use this mode when you want to play the keyboard in a band or a solo performance.
When you turn on the power, the
All of the three
In Patch mode you can select and edit patches, and create user patches.
fig.r02-01_40
Performance mode
In this mode, you can simultaneously play different sounds on sixteen parts. After turning on the power, press [PERFORM] to select this mode. The three
You can create up to 8 user performances.
fig.r02-02_40
Editing parameters
On the
fig.r02-05
cursor
Basic procedure
The basic procedure for editing a parameter is to use PAGE/ CURSOR [ ]/[
] to move between pages, and use VALUE
fig.r02-06
In cases where there are numerous pages, pages of related content are organized into groups. When editing such parameters, you can hold down [SHIFT] and use PAGE/CURSOR [ ]/[
] to jump to the previous or next group.
When using PAGE/CURSOR [ ]/[
] or VALUE
PAGE/CURSOR [ ]/[
] will move you more rapidly between pages if you continue holding them down. In some cases, you will automatically stop at the beginning of the group.
Executing a command
If [ENT] is indicated in the upper right of the display, you can execute the command you have selected by pressing [ENTER].
fig.r02-05a_40
In the example above, pressing [ENTER] executes the Patch Parameter copy (p. 49).
42