Roland RS-50 owner manual Step Flanger, St Delay Stereo Delay, When Feedback Mode is Normal

Adding effects

Parameter	Value	Description
Balance	D100:0W–	Adjusts the volume balance be-
	D0:100W	tween the direct sound and the
		flanger sound.
		With a setting of D100:0W only the
		direct sound will be output, and
		with a setting of D0:100W only the
		flanger sound will be output.
Level	0–127	Adjusts the output level.

16: STEP FLANGER

The Step Flanger effect is a flanger in which the flanger pitch

changes in steps.

fig.MFX-16

		Balance D	2-Band
L in				L out
			EQ
	Step Flanger		Balance W
		Feedback
		Feedback
			Balance W
	Step Flanger
R in			2-Band	R out
		Balance D	EQ
Parameter		Value	Description
Pre Delay		0.0–100 [ms]	Adjusts the time delay from
			when the direct sound begins
			until the flanger sound is heard.
Rate		0.05–10.00 [Hz]	Adjusts the rate of modulation.
Depth		0–127	Adjusts the depth of modula-
			tion.
Feedback #		-98– +98 [%]	Adjusts the amount (%) of the
			flanger sound that is returned
			(fed back) into the input.
			Negative (-) settings will invert
			the phase.
Step Rate #		0.1–20.0 [Hz],	Adjusts the rate (period) of pitch
		note *2	change.
Phase		0–180 [deg]	Adjusts the spatial spread of the
			sound.
Balance		D100:0W–	Adjusts the volume balance be-
		D0:100W	tween the direct sound and the
			flanger sound.
			With a setting of D100:0W only the
			direct sound will be output, and
			with a setting of D0:100W only the
			chorus sound will be output.
Reset		OFF, ON	This setting determines whether
			the period for the pattern is reset
			(ON), or not (OFF) when sounds
			are played.
			While the rhythm guide is play-
			ing, the period for the pattern is
			not reset even if you set this ON.
Level		0–127	Adjusts the output level.

17: St DELAY (Stereo Delay)

This is a stereo delay.

When Feedback Mode is NORMAL:

fig.MFX-17a

Balance D	2-Band
L in		L out
	EQ
Delay	Balance W
Feedback
Feedback
Delay	Balance W
R in	2-Band	R out
	EQ
Balance D

When Feedback Mode is CROSS:

fig.MFX-17b

	Balance D	2-Band
L in			L out
		EQ
	Delay	Balance W
	Feedback
	Feedback
		Balance W
	Delay
R in		2-Band	R out
	Balance D	EQ
Parameter	Value	Description
Feedback Mode	NORMAL,	Selects the way in which delay
	CROSS	sound is fed back into the effect.
		NORMAL: The left delay sound
		will be fed back into the left de-
		lay, and the right delay sound
		into the right delay.
		CROSS: The left delay sound
		will be fed back into the right de-
		lay, and the right delay sound
		into the left delay.
Delay Left	0–420 [ms],	Adjusts the time from the direct
	note *1	sound until when the left delay
		sound is heard.
Delay Right	0–420 [ms],	Adjusts the time from the direct
	note *1	sound until when the right delay
		sound is heard.
Phase Left	NORMAL,	Selects the phase of the left delay
	INVERT	sound.
		NORMAL: Phase is not
		changed.
		INVERT: Phase is inverted.
Phase Right	NORMAL,	Selects the phase of the right de-
	INVERT	lay sound.
		NORMAL: Phase is not
		changed.
		INVERT: Phase is inverted.
Feedback #	-98– +98 [%]	Adjusts the proportion (%) of
		the delay sound that is fed back
		into the effect.
		Negative (-) settings will invert
		the phase.

74