Roland RS-50 owner manual Try out the sounds, Selecting sounds by category

Try out the sounds

fig.q04-02

1 2 3

1.Press [PATCH] so it is lit and you are in Patch mode.

2.Use [0]–[9] to specify the category group of the patch you want to select.

3.Use VALUE [-]/[+] to select sounds within the category group.

Selecting sounds by category

In Patch mode, the direct access buttons [0]–[9] act as category select buttons. Since the patches you select for [0]–[9] (each category) will be remembered even when the power is turned off, you can select ten favorite patches from the panel and recall those patches instantly just by pressing [0]–[9].

The rhythm sets are included in [0] (p. 22).

You can turn [NUMERIC] on and use the [0]–[9] numeric keys to input a patch number directly. Press [ENTER] to finalize the number (p. 43).

Quick Start

Patch list (p. 111)

21