Roland RS-50 owner manual Chorusdelay, Flgdelay Flanger→Delay

Adding effects

36: CHORUS>DELAY

This effect connects a chorus and a delay unit in series.

fig.MFX-36

		Balance D
L in							L out
		Balance W			Balance D
						Balance W
	Chorus				Delay	Balance W
		Balance W
					Feedback
R in							R out
		Balance D			Balance D
Parameter			Value	Description
Cho Delay			0.0–100 [ms]	Adjusts the time delay from
				when the direct sound begins
				until the chorus sound is heard.
Cho Rate			0.05–10.00 [Hz]	Adjusts the modulation speed of
				the chorus effect.
Cho Depth			0–127	Adjusts the modulation depth of
				the chorus effect.
Cho Balance #			D100:0W–	Adjusts the volume balance be-
			D0:100W	tween the direct sound and the
				chorus sound.
				With a setting of “D100:0W,”
				only the direct sound will be
				output. With a setting of
				“D0:100W,” only the chorus
				sound will be output.
Delay Time			0–500 [ms]	Adjusts the time delay from
				when the direct sound begins
				until the delay sound is heard.
Dly Feedback			-98– +98 [%]	Adjusts the proportion (%) of
				the delay sound that is fed back
				into the delay input.
				Negative (-) settings will invert
				the phase.
Dly HF Damp			200–8000 [Hz],	Adjusts the frequency above
			BYPASS	which delayed sound fed back
				to the delay input will be cut.
				If you do not want to cut the
				high frequencies of the feed-
				back, set this parameter to BY-
				PASS.
Dly Balance #			D100:0W–	Adjusts the volume balance be-
			D0:100W	tween the chorus sound that is
				sent through the delay and the
				chorus sound that is not sent
				through the delay.
				With a setting of “D100:0W,”
				only the chorus sound will be
				output. With a setting of
				“D0:100W,” only the chorus
				sound that is sent through the
				delay will be output.
Level			0–127	Adjusts the output level.

37: FLG>DELAY (Flanger→Delay)

This effect connects a flanger and a delay in series.

fig.MFX-37

	Balance D
L in									L out
		Feedback				Balance D
								Balance W
				Balance W
		Flanger		Balance W			Delay	Balance W
						Feedback
R in									R out
	Balance D					Balance D
Parameter			Value		Description
Flg Delay			0.0–100 [ms]		Adjusts the time delay from
					when the direct sound begins
					until the flanger sound is heard.
Flg Rate			0.05–10.00 [Hz]		Adjusts the modulation speed of
					the flanger effect.
Flg Depth			0–127		Adjusts the modulation depth of
					the flanger effect.
Flg Feedback			-98– +98 [%]		Adjusts the proportion (%) of
					the flanger sound that is fed
					back into the effect.
					Negative (-) settings will invert
					the phase.
Flg Balance #			D100:0W–		Adjusts the volume balance be-
			D0:100W		tween the direct sound and the
					flanger sound.
					With a setting of “D100:0W,”
					only the direct sound will be
					output. With a setting of
					“D0:100W,” only the flanger
					sound will be output.
Delay Time			0–500 [ms]		Adjusts the time delay from
					when the direct sound begins
					until the delay sound is heard.
Dly Feedback			-98– +98 [%]		Adjusts the proportion (%) of
					the delay sound that is fed back
					into the delay input.
					Negative (-) settings will invert
					the phase.
Dly HF Damp			200–8000 [Hz],		Adjusts the frequency above
			BYPASS		which delayed sound fed back
					to the delay input will be cut.
					If you do not want to cut the
					high frequencies of the delay
					feedback, set this parameter to
					BYPASS.
Dly Balance #			D100:0W–		Adjusts the volume balance be-
			D0:100W		tween the flanger sound that is
					sent through the delay and the
					flanger sound that is not sent
					through the delay.
					With a setting of “D100:0W,”
					only the flanger sound will be
					output. With a setting of
					“D0:100W,” only the flanger
					sound that is sent through the
					delay will be output.
Level			0–127		Adjusts the output level.

82