![](/images/new-backgrounds/1304614/304614181x1.webp)
Settings common to all modes (System Function)
Tx Edit Data (Transmit Edit Data Switch)
Specify whether changes you make in the settings of a patch or performance will be transmitted as system exclusive messages (ON), or will not be transmitted (OFF).
VALUE: | OFF, ON |
Tx Active Sens (Transmit Active Sensing Switch)
Specifies whether Active Sensing messages will be transmitted (ON) or not (OFF).
VALUE: | OFF, ON |
Device ID (Device ID Number)
When you want to transmit or receive System Exclusive messages, set this parameter to match the Device ID number of the other MIDI device.
VALUE:
Soft Thru (Soft Through Switch)
The Thru function
VALUE: | OFF, ON |
Making scale tune settings for a patch (PATCH SCALE)
The Patch Scale function lets you use a variety of tunings for patches used in Patch mode.
If you want to make scale tune settings for each part in Performance mode, refer to “Editing the scale tune settings (SCALE TUNE)” (p. 58).
Type (Patch Scale Tune Type)
You can switch the “Type” parameter to recall various sample settings for Patch Scale. When you change “Type,” all patch scale tune parameters will be changed automatically.
VALUE: EQUAL, JUST (maj) in C, JUST (min) in C, ARABIC
For details on each type, refer to “Type (Part Scale Tune Type)” (p. 58).
Tune
Make scale tune settings for Patch mode.
VALUE:
System Function
91