Roland RS-50 Space-D, St Chorus Stereo Chorus, St Flanger Stereo Flanger, Off, Lpf, Hpf

13: SPACE-D

Space-D is a multiple chorus that applies two-phase modulation in stereo. It gives no impression of modulation, but produces a transparent chorus effect.

fig.MFX-13

		Balance D	2-Band
L in				L out
			EQ
			Balance W
	Space-D
			Balance W
	Space-D
R in			2-Band	R out
		Balance D	EQ
Parameter		Value	Description
Pre Delay		0.0–100 [ms]	Adjusts the time delay from
			when the direct sound begins
			until the processed sound is
			heard.
Rate #		0.05–10.00 [Hz]	Adjusts the rate of modulation.
Depth		0–127	Adjusts the depth of modula-
			tion.
Phase		0–180 [deg]	Adjusts the spatial spread of the
			sound.
Low Gain		-15– +15 [dB]	Adjusts the gain of the low fre-
			quency.
High Gain		-15– +15 [dB]	Adjusts the gain of the high fre-
			quency.
Balance #		D100:0W–	Adjusts the volume balance be-
		D0:100W	tween the direct sound and the
			chorus sound.
			With a setting of D100:0W only the
			direct sound will be output, and
			with a setting of D0:100W only the
			chorus sound will be output.
Level		0–127	Adjusts the output level.

14: St CHORUS (Stereo Chorus)

This is a stereo chorus. A filter is provided so that you can adjust the

timbre of the chorus sound.

fig.MFX-14

		Balance D	2-Band
L in				L out
			EQ
			Balance W
	Chorus
			Balance W
	Chorus
R in			2-Band	R out
		Balance D	EQ
Parameter		Value	Description
Filter Type		OFF, LPF, HPF	Selects the type of filter.
			OFF: A filter will not be used.
			LPF: Cuts the frequency range
			above the cutoff frequency.
			HPF: Cuts the frequency range
			below the cutoff frequency.
Cutoff Freq		200–8000 [Hz]	Adjusts the basic frequency of
			the filter.
Pre Delay		0.0–100 [ms]	Adjusts the time delay from
			when the direct sound begins
			until the processed sound is
			heard.
Rate #		0.05–10.00 [Hz]	Adjusts the rate of modulation.

Adding effects

Parameter	Value	Description
Depth	0–127	Adjusts the depth of modula-
		tion.
Phase	0–180 [deg]	Adjusts the spatial spread of the
		sound.
Low Gain	-15– +15 [dB]	Adjusts the gain of the low fre-
		quency.
High Gain	-15– +15 [dB]	Adjusts the gain of the high fre-
		quency.
Balance #	D100:0W–	Adjusts the volume balance be-
	D0:100W	tween the direct sound and the
		chorus sound.
		With a setting of D100:0W only the
		direct sound will be output, and
		with a setting of D0:100W only the
		chorus sound will be output.
Level	0–127	Adjusts the output level.

15: St FLANGER (Stereo Flanger)

This is a stereo flanger. It produces a metallic resonance that rises and falls like a jet airplane taking off or landing. A filter is provided so that you can adjust the timbre of the flanged sound.

fig.MFX-15

	Balance D	2-Band
L in			L out
		EQ
	Flanger	Balance W
	Feedback
	Feedback
	Flanger	Balance W
R in		2-Band	R out
	Balance D	EQ
Parameter	Value	Description
Filter Type	OFF, LPF, HPF	Selects the type of filter.
		OFF: A filter will not be used.
		LPF: Cuts the frequency range
		above the cutoff frequency.
		HPF: Cuts the frequency range
		below the cutoff frequency.
Cutoff Freq	200–8000 [Hz]	Adjusts the basic frequency of
		the filter.
Pre Delay	0.0–100 [ms]	Adjusts the time delay from
		when the direct sound begins
		until the flanger sound is heard.
Rate #	0.05–10.00 [Hz]	Adjusts the rate of modulation.
Depth	0–127	Adjusts the depth of modula-
		tion.
Phase	0–180 [deg]	Adjusts the spatial spread of the
		sound.
Feedback #	-98– +98 [%]	Adjusts the amount (%) of the
		processed sound that is returned
		(fed back) into the input. Posi-
		tive (+) settings will return the
		sound in phase, and negative (-)
		settings will return the sound in
		reverse phase.
				Effects
Low Gain	-15– +15 [dB]	Adjusts the gain of the low fre-
		quency.
High Gain	-15– +15 [dB]	Adjusts the gain of the high fre-
		quency.

73