Roland RS-50 owner manual Reset to default factory settings Factory Reset

Reset to default factory settings (Factory Reset)

This restores all data in the RS-50 to the factory-set condition (Factory Reset).

fig.q02-01

1 2 3 4, 5

Be sure not to turn off the power while Factory Reset is being performed.

If the power is turned off or interrupted while data is being written to memory, the internal data may become corrupted.

1.Press [PATCH] so it is lit and you are in Patch mode.

2.Press [UTILITY] so it is lit.

3.Use PAGE/CURSOR [ ]/[ ] to select “5:FACTORY RESET.”

fig.q02-02_40

4.Press [ENTER].

fig.q02-03_40

5.Press [ENTER] again to execute the Factory Reset.

When the display indicates “COMPLETED,” the factory reset operation has been completed.

If there is important data you’ve created that’s stored in the RS-50’s internal memory, you must note that all such data will be discarded when a Factory Reset is performed. If you want to keep the existing data, save it using an external sequencer (p. 98).

Press [EXIT] to cancel the factory reset.

Factory Reset can be executed not only from Patch mode, but also from the Utility functions of Performance mode (p. 61).

17