3307568 User’s Manual | Hardware Setup |
To setup the LCD, you need the component below:
1.A panel with LVDS interfaces.
2.An inverter for panel’s backlight power.
3.A LCD cable and an inverter cable.
For the cables, please follow the pin assignment of the connector to make a cable, because every panel has its own pin assignment, so we do not provide a standard cable; please find a local cable manufacture to make cables.
LCD Installation Guide:
1.Preparing the 3307568, LCD panel and the backlight inverter.
2.Please check the datasheet of the panel to see the voltage of the panel, and set the jumper JVLCD to +5V or +3.3V.
3.You would need a LVDS type cable.
Panel side | Board side |
For sample illustrator only
4. To connect all of the devices well.
Onboard Display Interface | 23 |
