Buzzaround Lite™ Owner’s Manual – Models GB106 and GB106XR

Updated 07/08

Possible causes for the main circuit breaker to trip

“Run-down” batteries.

Over exerting the motor.

Possible solutions:

Recharge your batteries.

If the problem persists, have an authorized Golden Technologies dealer “load test” the batteries to assure they are not damaged.

If the problem persists, assure your battery charger is operating properly.

Resetting the Main Circuit Breaker

If the main circuit breaker trips as a result of “run-down” batteries or because of a temporary overload, reset the circuit breaker using the following directions:

1.Wait 5 minutes to allow the motor and electronics board to cool, or return to “normal” operating temperature.

2.Press in on the main circuit breaker reset button.

WARNING: BE SURE YOU REMOVE THE KEY FROM THE KEY RECEPTACLE BEFORE RESETTING YOUR SCOOTER.

NOTE: If the main circuit breaker continues to trip, there is an underlying electrical fault that needs professional attention. Please contact your local Golden Technologies Dealer.

NOTE: Do not reset your main circuit breaker repeatedly. You must correct the underlying problem. Failure to correct the problem could cause injury or damage and will void the warranty.

Page 23

Page 23
Image 23
Golden Technologies GB106XR owner manual Possible causes for the main circuit breaker to trip