Buzzaround XL Owner’s Manual

RevA_092210

VI. RIDING YOUR Buzzaround XL™

MOUNTING

NOTE: For your first driving session, make certain that your Buzzaround XL™ starts out on a level surface and that you will continue driving on a level surface.

BEFORE GETTING ON YOUR BUZZAROUND XL

1.Check to be certain that the key has been removed from the key switch. See section V. "Operation" in this manual. This will eliminate the possibility of accidentally activating the paddle controls and causing injury to yourself and/or others.

2.Check to be certain that your Buzzaround XL™ freewheel lever is in the engaged position. See section V. “Operation” in this manual.

3.Flip up or remove the armrests.

When getting on or off your Buzzaround XL™, keep your weight toward the middle of the deck. Putting most or all of your weight on the edge of the deck may cause an unstable condition.

GETTING ON YOUR BUZZAROUND XL

1.Position the seat for safe and easy mounting. Ensure that the seat is facing forward. See Section V. "Operation."

2.Return tiller to full upright position if necessary.

3.Carefully place one foot on the approximate center of the deck and seat yourself comfortably and securely on the seat.

4.Flip down or replace the armrest(s.)

5.Place the key into the key switch.

6.Rotate the key clockwise to the on position. See figures 13 and 14.

Figure 13. Key Switch (Off)

Figure 14. Key Switch (On)

21

Page 22
Image 22
Golden Technologies GB116 owner manual VI. Riding Your Buzzaround XL, Mounting Before Getting on Your Buzzaround XL