Buzzaround XL Owner’s Manual

RevA_092210

VIII. ASSEMBLY

Install the Seat

7.Hold the seat on an angle so you can see the seat swivel post underneath

8.Place the seat swivel post into the seat receiver post as shown in figure 24.

9.Pull up on the seat release lever to lock the seat in place.

Figure 24. Installing the Seat

Pinch Point! Keep hands and clothing clear of the seat swivel post and seat post.

Accident hazard due to non-engaged seat! Ensure that the seat is properly engaged by turning the seat slightly left and right.

Unlock the Tiller

10. Turn the tiller lock knob to the unlocked position. See figure 23 on page 29.

IF YOU DON’T UNLOCK YOUR TILLER LOCK KNOB, YOUR TILLER WILL NOT TURN! THIS COULD CAUSE INJURY.

Accident hazard due to incorrect seat position! Always turn the seat to face forwards and engage it before driving. If the seat is in any other position, the possibility of tipping is increased. Before turning the seat, always ensure that the scooter is on an even and solid surface.

30

Page 31
Image 31
Golden Technologies GB116 owner manual Install the Seat, Unlock the Tiller