Figure 16. Lowered Tiller

LiteRider™ Owner’s Manual

Rev.A_122810

VII. DISASSEMBLY

Fold Down and Lock the Tiller

6.Push in and turn the tiller lock clockwise 90 degrees. See #1 on figure 16. This will lock the front wheel to keep it from turning side to side to help control while carrying.

3 2

Tiller lock in locked position.

1

Figure 16. Lowered Tiller

7.Loosen tiller adjustment knob and fold the tiller down flat. See #2 on figure 16. Then tighten the adjustment knob to secure the tiller in its new position. Once the tiller is lowered and locked, and the scooter is disassembled you may use it as a handle for easy transportation. See #3 on figure 16.

Separate the Drivetrain from the Frame

Separate the Drivetrain from the Frame Be careful not to pinch your fingers between the frames. This area is a pinch-point and requires your full attention.

8.Pull up on the drivetrain release lever. See figure 17. Pull the frame up and off of the drivetrain. See figure 18.

Figure 17. Releasing the Drivetrain

Figure 18. Lifting the Frame

25

Page 26
Image 26
Golden Technologies GL140, GL110 Lowered Tiller, Separate the Drivetrain from the Frame, Releasing the Drivetrain