Alante DX/LT Owner’s Manual | Rev A_011811 |
VI. COMFORT SETTINGS - cont.
2.Adjust the arms to the desired width making sure not to exceed 28 inches total outside width at the armrests.
3.Tighten the arm width adjustment screw to secure the arm. See figure 18 on page 21.
4.Repeat steps
Arm Rest Angle Adjustment
1.Lift the armrest.
2.Loosen the stop nut with a 10mm wrench. See figures
3.Use a 5mm Allen wrench to turn the armrest angle adjustment screw. Turn the screw outward to adjust the angle downward, turn it inward to adjust the angle upward to the desired angle.
Adjustment screws
10mm
stop nut
Figure 19 | Figure 20 | Figure 21 |
4.Tighten the stop nut with a 10mm wrench to lock the armrest angle adjustment screw.
5.Repeat steps
Footrest Angle Adjustment
1. Lift the footrest plate to access the adjustment bolt. See figure 22.
Footrest Plate
Adjustment bolt
Figure 22
22