Golden Technologies GP600 SS Comfort Settings, Adjusting the seat with a front to rear angle

Compass Owner’s Manual – Models: GP600 SS, GP600 CC

COMFORT SETTINGS

Adjusting the seat with a front to rear angle

Bottom of

Seat

Revised 05/23/13

Seat

Guide

Adjusting

Bolts

Loosen seat guide adjusting bolts using a 6mm Allen wrench provided in the charger bag and a pair of pliers or a 13mm open end wrench. Place the seat receivers in the lowest position and insert the ball detent pins through the towers and seat receiver legs. Leave the seat guide adjusting bolts loose. Slide the seat into the receivers, adjust seat to the desired height and angle using the (4) detent pins. Leave the seat in the seat receivers and tighten the seat guide adjusting bolts. This process is more easily accomplished with two people. Note: seat receivers must be 2” higher when using NF22 battery cover.

Seat Guides

Seat Angle

Adjusting Pins

Front Seat Locking

Handle

Seat

Tower

18