2 | UNPACKING AND PREPARING |
• Unpacking
Open the box from the top, take all the accessories out of the box and remove the polystyrene containing structures.
Open the plastic bag, remove the projector from the box frame and position it on a horizontal top where access is easy to carry out the following preliminary work.
• Packing contents
Besides the projector, the packing also contains the following accessories:
- This instructions manual code 099406 (1).
- 2 spacers code |
|
| 1 | |
|
|
| ||
167002/001 (2). |
|
|
| |
- 1 right bracket support plate |
|
|
| |
code 167003/001 (3). |
|
|
| |
- 1 left bracket support plate |
|
|
| |
code 167003/002 (4). |
|
|
| |
- 2 eyebolts M8x20mm |
|
| 2 | |
code 167004/001 (5). |
|
|
| |
- 2 nuts M8 |
|
|
| |
code 020106/006 (6). |
|
| 6 | |
- 2 knobs code 020502 (7). |
| 4 | ||
3 | 5 | |||
- 2 plane washers ø10,5mm |
| |||
|
| |||
|
|
|
code 020210/004 (8).
• Fitting the bracket
3
8 7
6 2 4 5
9
10
13
11 
12
• Fitting the handles (only for TV version)
19 18
-1 bracket
code 101011/001 (9).
-4 bracket bushings code 101014/001 (10).
-4 countersunk washers code 080606/001 (11).
-4 countersunk head screws M8x20mm code 020005/001 (12).
8
7
| 9 |
| 10 |
| 11 |
17 | 12 |
|
14 15 4
- 1 Allen wrench 5 mm | 16 |
code 050001 (13). | 13 |
| |
- 4 handles |
|
code 082017/001 (14) | 14 |
(only for TV version). | |
- 8 screws TCEI M8x20 | 15 |
code 020002/029 (15). |
-Multilingual label (16) with
safety information code 081948/003
(located in the projector lampholder compartment).
-1 safety ropes code 105041/001 (17).
• Preparing the warning label
Find the warning label (19) on the
4 MAINTENANCE.
CAUTION: Read carefully and meticulously apply the information and instructions given on this label. In addition, check it is never removed as it contains important safety information.
• Fitting the lamp
Refer to the instructions for opening the projector and changing the lamp in paragraph 4 MAINTENANCE.
2
