Golden Technologies HMI 575 Trouble Shooting, Periodical cleaning, Technical Data, Channels, Body

• Periodical cleaning

6 TECHNICAL DATA

To keep optimum efficiency and functionality over time, it is vital to periodically clean the parts where dust and grease can accumulate.

The frequency with which to carry out the following operations depends on several factors, such as the number of movements of the effects and the quality of the work environment (air humidity, dustiness, saltiness, etc.).

To remove dirt from the lenses and filters, use a soft cloth dampened with any liquid detergent for cleaning glass.

Power supply available

•230V 50Hz

•240V 50Hz

•208V 60Hz

•200V 50Hz

•200V 60Hz

The projector is designed to operate at mains frequency and voltage given on the electrical data label on the back of the appliance.

Channels

6 control channels (normal operation) or

8 control channels (extended operation)

Inputs

•RS232/423 (PMX).

•DMX 512.

Rotating mirror head

•Head rotatable through 360° on projector housing.

Never use solvents or spirits.

Parts requiring frequent cleaning.

Parts requiring monthly cleaning.

Once a year it is recommended to submit the projector to qualified technical personnel for non-routine maintenance consisting of at least the following operations:

- General cleaning of internal parts.

- Restoring lubrication of all parts subject to friction, using lubricants specifically

Lamp

Metal halide type supplied with special built-in power supply unit.

•Type HMI 1200W/GS

-Cap SFc 15,5-6

-Colour temperature 6.000 K

-Luminous flux 110.000 lm

-Average life 750 h

-Any working position

•Type HMI 575W

-Cap SFc 10-4

-Colour temperature 6.000 K

-Luminous flux 49.000 lm

-Average life 750 h

-Any working position

Input power

•HMI 1200 Touring Version: 1500VA at 220V 50Hz (correction factor 140µF standard)

•HMI 1200 Version: 3000VA at 220V 50Hz

•HMI 575 Version:

1500 VA at 220V 50Hz

•Graduated scale for easy and accurate positioning.

•Anchorage for safety wire.

•Mirror of ultra-high luminous efficiency.

•Movement by means of three stepper motors, controlled by microprocessor.

•Travel:

-PAN = 150°

-TILT = 110°

•Speed:

-PAN = 0,4 sec (150°)

-TILT = 0,3 sec (110°)

•Resolution:

-PAN = 0.6° (150°)

-TILT = 0.4° (110°)

Safety Devices

•Bipolar circuit breaker with thermal protection.

•Automatic break in power supply in case of overheating or failed operation of cooling system.

•Automatic disconnection of the power supply at the opening of the re-lam- ping cover.

supplied by Clay Paky.

- General inspection of internal components, wiring, mechanical parts, etc.

- Electrical, photometric and functional tests.

- Any repairs.

5				TROUBLE SHOOTING
	THE PROJECTOR WILL NOT SWITCH ON
		THE ELECTRONICS DO NOT WORK				TROUBLE
			DEFECTIVE PROJECTION
				REDUCED BRIGHTNESS
				POSSIBLE CAUSES	CHECKS AND REMEDIES

Motors

9 stepper motors, operating with micro- steps, totally microprocessor controlled.

Optical unit

•Base in die-cast aluminium.

•Twin lens condenser.

•Spherical reflector with a high luminous efficiency.

Lens unit

•Standard: 1:2,5/250 mm.

•Optional: 1:3,3/300 mm.

•Optional: 1:1,6/160 mm

(to be fitted internally of projector).

• Two fixing points for safety rope.

Cooling

Forced ventilation with axial fans.

Body

•In die-cast and extruded aluminium.

•Epoxy powder painting.

•Four side handles for transportation (standard feature on Touring Version only).

Support

•Steel bracket with epoxy powder painting.

•Six installation positions, 25mm (1”) apart.

•Bracket adjustable through 100° with graduated scale to assist positioning.

•		No mains supply.	Check there is power at the
			supply socket.
•	•	Lamp exhausted or defective.	Replace the lamp
			(see instructions).
•		Signal transmission cable	Replace cables.
		short-circuited or disconnected.
•		Wrong coding.	Check coding
			(see instructions).
•		Defect in electronic circuits.	Call an authorized technician.
•		Lenses or reflector broken.	Call an authorized technician.
• •		Dust or grease deposited.	Clean
			(see instructions).

HMI 575= 1.105 HMI 1200= 1.230

(48.42")	365	(14.4")
(43.5")		1200= 954
			(37.56")
		HMI
		575= 829	(32.64")
		HMI

330

(12.99")

Working position

Operation in any position.

Weights and dimensions
• HMI 1200 TV: 36.4 kg	(80 lbs	1 ozs)
• HMI 1200: 35.5 kg	(78 lbs	2 ozs)

•HMI 575: 29.5 kg (64 lbs 14 ozs)

•Mirror head: 3.1 kg ( 6 lbs 13 ozs)

360435

(14.2") (17.1")

235 (9.25")

6