6.Hold the Console (16) near the Upright (13). Connect the console wire to the Upper Wire Harness (36).
Insert the excess console wire and Upper Wire Harness (36) downward into the Upright (13). Next, attach the Console (16) to the Upright with four M4 x 16mm Screws (49). Be careful to avoid pinching the wires.
7.Attach the Seat Frame (28) to the Frame (1) with three M8 x 25mm Button Screws (45) and three M8 Split Washers (41).
8.Turn the Seat Knob (11) counterclockwise and pull it outward. Next, insert the Seat Post (5) into the Seat Frame (28). Press the Seat Post Endcap (54) into the lower end of the Seat Post.
Next, align one of the adjustment holes in the Seat Post (5) with the indicated hole in the Seat Frame (28). Then, release the Seat Knob (11) into the Seat Frame and the Seat Post, and turn the Seat Knob clockwise a few turn. Make sure that the Seat Knob is inserted through one of the adjustment holes in the Seat Post.
6 |
|
|
| Console |
|
| Wire |
|
49 |
|
|
|
| 16 |
|
| 36 |
| 13 | Avoid pinching |
|
| |
49 |
| the wires during |
| this step | |
|
| |
7 |
|
|
| 41 | 45 |
|
| |
| 45 |
|
| 41 |
|
| 45 | 28 |
|
| |
| 1 |
|
8 |
|
|
| 5 |
|
|
| Adjustment |
|
| Holes |
| 28 |
|
|
| 11 |
|
| Hole |
| 54 |
|
8
