2.While another person lifts the rear of the Frame (1), attach the Rear Stabilizer (6) with two M10 x 75mm Carriage Bolts (30) and two M10 Nylon Locknuts (33).
3. Tip: Avoid pinching the Wire Harnesses (36, 55) |
during this step. |
While another person holds the Upright (13) in the |
position shown, connect the Upper Wire Harness (36) |
2 |
33 |
6 |
33 |
1 |
30 |
3 |
to the Lower Wire Harness (55). |
Carefully pull the excess Upper Wire Harness (36) out |
of the top of the Upright (13), and slide the Upright |
onto the Frame (1). Next, attach the Upright with three |
M8 x 25mm Button Screws (45) and three M8 Split |
Washers (41). |
Attach the Water Bottle Holder (8) to the Upright (13) |
with two M4 x 22mm Screws (20). |
41
45
Avoid pinching the Wire Harnesses (36, 55) during this step
8
20
13
41 45
36 55
1
6
