Datavideo VDR-3000 instruction manual Connecting to a Projection TV / Monitor with Component Video

Connecting to a Projection TV / Monitor with Component Video

NOTE: While connecting please ensure that the VDR 3000 and all devices that you are connecting to are switched off.

The VDR 3000 should be connected to the component R.G.B. or Y.U.V. video and audio inputs of a Projection TV / Monitor.

Project TV/ Monitor

PR PB Y

R B G

To Hi-Fi System

Selects the AC input range 115VAC or 230VAC for VDR-3000

To connect to a component input a three BNC plug (R.G.B. or Y.U.V. Video) to BNC Plug cable will be required.

NOTE: The Composite and S (Y/C) video cables should be disconnected when hooking up the Component video output to TV/Monitor to ensure the best component video level.

15