Datavideo VDR-3000 instruction manual Connecting an analog video source

Connecting an analog video source

NOTE: While connecting please ensure that the VDR 3000 and all devices that you are connecting to are switched off.

Source Audio/ Video

TV/ Monitor

R L S

Selects the input source to Video

Selects the AC input range 115VAC or 230VAC for VDR-3000

An analog video device can be connected via composite or S-Video if available. Connect the left and right audio output from the device to the left and right audio input on the rear of the VDR 3000. Connect either the composite video out (yellow phono (RCA)) or the S- Video out (mini 4 pin) from the device to the video input on the rear of the VDR 3000. Only connect composite or S-Video – do not connect both.

Set the Input Source Selector Switch to the V position.

12