Datavideo VDR-3000 instruction manual Recording a disk

To return to the previous track press the Previous Button on the VDR 3000 or remote control handset

If you wish to search through a track during playback you can press the F.F. Button. There are several speeds available and pressing the F.F. Button will cycle through to a faster fast forward speed.

To search back through a track, press the REW Button. There are several speeds available and each press of the REW Button will cycle through to a faster rewind speed.

To pause a track during playback, press the Pause Button. This will stop the playback and a still image of the frame will be held on the TV Monitor (video disk only). You can move forward one frame at a time by pressing the STP (STEP) Button. To release the pause and return to normal playback press the Play Button.

To stop playback press the Stop Button.

To silence the track during playback press the Mute Button. To cancel the mute function press the Mute Button a second time.

To remove the disk press the Eject Button, the CD tray will slide open. Remove the disk and press the Eject Button again to close the CD tray.

Recording a disk

The VDR 3000 can record onto CD-R and CD-RW disks. CD-R disks can only be recorded once whereas CD-RW disks can be erased and re-recorded several times.

Press the Eject Button on the front of the VDR 3000 or on the remote control handset and the CD tray will slide open.

Place the disk that you want to record on to in the tray, printed side facing up.

Press the Eject Button and the CD tray will close and “LOAD” will appear on the display panel.

If the disk is blank after a few seconds’ six recording format options will appear on the TV screen VCD/HQVCD/SVCD/DVD-PHOTO/ CDDVD and CD-DA. Highlight the format that you want to record in by using the Up/Down Arrow Buttons and then press the Enter Button. This can be achieved by using the front panel of the VDR 3000 or by using the supplied remote control.

18