Q15. Is there a way to get Windows Media Player or any other editing program to recognize the "avseq01.dat" file created by the
The file name and extension of the raw mpeg file can be renamed
to a "*.mpg" extension. Windows Media Player is able to recognize this format.
Note: This will only work with
To achieve this, follow the directions below:
Explore your VCD or
Look for a folder called "MPEGAV" (this is where each track of *.dat files are saved in) Copy the AVSEQ01.DAT file to C:\ or any directory on your hard drive. Right click your "AVSEQ01.DAT" file and choose "Rename" Rename the file (anyname).MPG
Then press - Enter
The file now appears as a Windows Media Player icon with the name you gave it.
The file will now be recognized as such and will open in programs that are compatible with Windows Media Player.
Q16. What do I do if my machine has a rolling picture and I am inputting an NTSC signal?
The unit could be set to the wrong format such as PAL@25 frames/second. To change the input selector back to NTSC mode, the remote control is needed.
There is a button on the remote called "P/N" it stands for PAL/NTSC. It sets the input format of the machine. To change it back to NTSC please do the following:
1.Power the VDR on.
2.Insert a blank
3.Select any recording format. (VCD, etc.)
4.Press the "P/N button on the remote controller.
5.Keep pressing it until it either says "Auto or NTSC". (Either one of these modes should be fine.)
6.Once this is completed, eject the blank disk and discard it. This should make the PAL menu display go away and put the VDR 3000 into NTSC mode.
27
