Gold's Gym GGTL07809.0 See the inset drawing. Tie the wire tie, Fully tighten the Patch Bolts yet

3. Identify the right Upright (77), which is marked	3	76			Plate
with a sticker. Have a second person hold the						77
right Upright near Base (83). Orient the right								83
Upright so that the bend in the plate is in the po-			Wire
sition shown.
See the inset drawing. Tie the wire tie in the			Tie
right Upright (77) securely around the end of the
Upright Wire (76). Then, pull the other end of
the wire tie until the Upright Wire is routed com-
pletely through the right Upright.
	77	76
	Wire Tie
4. Attach the right Upright (77) to the Base (83)	4
with a 3/8" x 2 3/4" Patch Bolt (7), a 3/8" x 1"
Patch Bolt (8), and two 3/8" Star Washers (11);					77		76
do not fully tighten the Patch Bolts yet. Be								83
careful not to pinch the Upright Wire (76).									11
								8	7
5. With the help of a second person, carefully tip	5
the treadmill onto its right side. Partially fold the					Plate
Frame (51) so the treadmill is more stable. Do
not fully fold the Frame until the treadmill is		11	83	77
completely assembled.
Orient the left Upright (77) so that the bend in
the plate is in the position shown.
Attach the left Upright (77) to the Base (83) with	7	8						7
a 3/8" x 2 3/4" Patch Bolt (7), a 3/8" x 1" Patch
Bolt (8), and two 3/8" Star Washers (11); do not
fully tighten the Patch Bolts yet.					88
Attach a Wheel (91) to the indicated Extension						91
Leg (88) with a 3/8" x 2 3/4" Patch Bolt (7) and a
3/8" Nut (12). Do not overtighten the Nut; the							12	51
Wheel must turn freely.
With the help of a second person, tip the tread-
mill so that the Base (83) is flat on the floor.	8