6.

Hold a Bolt Spacer (95) inside the lower end of

6

 

 

 

 

 

the Left Upright (77). Insert a 3/8" x 4" Bolt (8)

8

 

 

 

 

with a 3/8" Star Washer (11) into the Left

 

 

 

77

 

Upright and the Bolt Spacer. Repeat this step

 

 

 

 

 

with a second Bolt Spacer (95), 3/8" x 4" Bolt

 

11

 

 

 

 

(8), and 3/8" Star Washer (11).

 

 

94

 

 

Hold the Left Upright Spacer (94) and the Left

93

95

 

 

 

 

 

 

 

Upright (77) against the Base (96). Tighten the

 

 

 

 

3/8" x 4" Bolts (8) until the heads of the Bolts

 

 

 

 

 

 

touch the Left Upright; do not fully tighten the

 

95

96

 

 

 

Bolts yet.

 

 

 

 

Press a Base Cap (93) into the Base (96).

 

 

 

 

 

 

With the help of a second person, tip the tread-

 

 

 

 

 

 

mill so that the Base (96) is flat on the floor.

 

 

 

 

 

7. Attach two Top Handrail Spacers (64) to the

7

 

 

 

 

 

Uprights (77, 92) with two #8 x 3/4" Tek Screws

 

 

 

 

 

(13).

13

 

 

 

 

 

 

 

 

 

 

64

 

 

77

 

 

 

 

 

 

 

 

 

 

 

 

13

 

 

 

 

 

 

64

92

 

 

 

 

 

 

8. Hold a Bottom Handrail Spacer (68) against the

8

 

 

 

 

 

Right Upright (92). Align the holes in the Bottom

 

 

 

 

 

Handrail Spacer with the holes in the Top

 

 

 

 

 

 

Handrail Spacer (64). Then, slide a Handrail

 

 

 

 

 

 

(80) onto the Handrail Spacers. Attach the

 

5

 

 

 

 

Handrail and Bottom Handrail Spacer to the

80

 

 

 

 

Right Upright with two 5/16" x 1 3/4" Bolts (5);

 

 

 

 

 

do not fully tighten the Bolts yet.

 

 

 

 

92

 

Repeat this step with the other Handrail (80)

 

 

68

5

 

 

 

64

 

and Bottom Handrail Spacer (68).

 

 

 

 

 

 

 

 

80

68

 

 

 

 

 

 

 

 

9

 

 

 

 

Page 9
Image 9
Gold's Gym GGTL07819.0 manual Bolts yet