Get Going

02

1Install the Antenna

Select a suitable location for the antenna. This can either be at one side of the front windscreen, as shown, or a suitable non-opening rear window. Note that the antenna cable is 2.0m in length. For best results, position the aerial wires 2-3 cms from the edge of the glass.

Peel the backing off the antenna and attach the antenna to the inside of the window, ensuring it is clean and dry before you do so. It is only designed to be used once, and if removed, will not re-adhere to the glass.

2Connect the Antenna

Run the antenna lead along the trim so it is not showing if possible, and attach to the unit by screwing the antenna connector onto the antenna jack on the side of the unit. Screw it up tightly using fingers only.

Don't Forget! A spanner is not necessary.

3Attach mount to the windscreen

Clean the area you have chosen with a dry cloth then peel off the transparent film from the suction cap. Press the suction cap firmly onto the windscreen and push down the catch to securely fasten the mount to the windscreen.

5