Goodmans GFMTDAB10 Switching On, Listening to DAB, Changing DAB stations, DAB Scan, Daily Use

Daily Use

Switching On

When the unit is plugged into the car supply it switches on automatically.

Listening to DAB

1If no DAB stations have been previously stored, the unit will perform a full scan. The following screen will be displayed. A bar graph indicates the progress of the scan – the number of stations increasing as the scan progresses.

Progress Bar

Current Multiplex block frequency

SCAN 12A

Found : 15

Number of stations found

2When the scan is complete, the unit will select the first station available - stations are listed in numeric then alphabetic order. The station list is retained in the unit’s memory so that next time you use the unit it does not perform a station scan, but selects the last station you listened to. If there are no stations found, check that DAB coverage exists in the area you are in.

0303

Changing DAB stations

Rotate the scroll wheel to scroll through the stations in the station list. Press the SELECT button to confirm. The unit will tune to the new station.

DON’T FORGET! If no new station is selected the unit will display the currently playing stations after 5 seconds. From time to time, and as you travel around, new DAB stations may become available. If you wish to see if any new stations are available, perform a DAB scan.

DAB Scan

The DAB SCAN button enables the unit to perform a full or a UK scan. A short press performs a UK scan (Channels 10A to 12D) and a long press performs a full Band III scan (Channels 5A to 13F)