Gossen BD 232, SI 232-II 3 Multimeter, Adapter and METRAwin10 Operating Modes 3.1 General Information, 3.2 Saving Measurement Data to Memory in the Multimeter, 3.3 Reading Out the Multimeters Memory

4GOSSEN METRAWATT GMBH
3 Multimeter, Adapter and METRAwin10 Operating Modes
3.1 General Information
• The address for the adapter and its corresponding multimeter must be identical.
• The baud rates for the adapter and the multimeter must also be the same.
• The multimeter’s sampling rate should be faster than the speed at which data are
requested by the memory adapter or METRAwin10 software.
3.2 Saving Measurement Data to Memory in the Multimeter
– for METRAHit 22M, 26M and 29S only
3.3 Reading Out the Multimeter’s Memory
– for METRAHit 22M, 26M and 29S only, with SI232-II or BD232
METRAHit, 22M,
26M or 29S only
store
rate:
send off
Rotary Switch:
set to measuring
function
SI232-II
Adr: 1
Bd-PC: 9600
Bd-MM: 8192
Mode: pc
METRAHit, 22M,
26M or 29S only
Adr: 1
Adapter: SI232
* store/online
rate:
send off
Rotary Switch:
set to measuring
function
BD232
Adr: 2
Bd-PC 9600
fixed
METRAHit 22M,
26M, 29S only
Adr: 2
Adapter: BD232
rate:
send off
Rotary Switch:
set to measuring
function
PC
* online only with
METRAHit 28S or 29S,
otherwise select store.
Up to 10 devices simultaneously
- when reading out memory,
Up to 4 devices simultaneously
- for live data transmission
METRAwin10
Set/Device type ..., Set/Channels ...
File/Read memory