Manuals / Brands / Computer Equipment / Network Card / Gossen / Computer Equipment / Network Card

Gossen BD 232, SI 232-II 3.6 Saving Measurement Data to the SI232/-II Memory Adapter

1 28

Download 28 pages, 389.96 Kb

6GOSSEN METRAWATT GMBH

3.6 Saving Measurement Data to the SI232/-II Memory Adapter

The memory adapter can be used with all multimeter versions.

Exception: Power and mains disturbance measurements (VAC + dropouts + peaks) with the

29Smultimeter can only be saved to internal multimeter memory.

Note: It is advisable to synchronize the clocks at the multimeter and the adapter before

starting memory mode operation.

3.7 Reading Out Measurement Data from the SI232/-II/-II Memory Adapter andConfiguring Ad apter Parameters

SI232

Adr: 1

Baud: 9600

Mode: store

METRAHit 1x, 2x

Adr: 1

Adapter: SI232

store

rate:

send on

Rotary Switch:

set to measuring

function

SI232-II

Adr: 2

Bd-PC: 9600

Bd-MM: 8192

Mode: store

METRAHit 1x, 2x

Adr: 2

Adapter: SI232

* store/online

rate:

send on

Rotary Switch:

set to measuring

function * online only with

METRAHit 28S or 29S und SI232-II,

otherwise select store.

SI232/-II

Adr: 1

Baud: 9600

Mode: pc

METRAHit 1x, 2x

Settings have no

significance.

SI232/-II

Adr: 2

Baud: 9600

Mode: pc

METRAHit 1x, 2x

Settings have no

significance.

METRAwin10

Set/Device type ..., Set/Channels ...

File/Read memory

PC

Contents

Main Page Page 3 Multimeter, Adapter and METRAwin10 Operating Modes 3.1 General Information 3.2 Saving Measurement Data to Memory in the Multimeter 3.3 Reading Out the Multimeters Memory 3.4 Configuring Multimeter Parameters for all METRAHit 2x with SI232-II or BD232 3.5 Receiving Live Measurement Data from the DMM via adapter, but without saving to memory in the adapter SI232-II 3.6 Saving Measurement Data to the SI232/-II Memory Adapter 4 Adapter Connection and Initial Start-Up 4.1 Connecting the Adapter 4.2 Initial Start-Up - SI232-II Memory Adapter Page 21.978 mA 5.2 Display 3 1 2 5.3 Switching the Memory Adapter ON and OFF 5.4 Replacing the Batteries 6 Operating Instructions at a Glance 6.1 Menu Driven Operation 6.2 Adapter Shortcut Functions Start / Stop Manual Data Recording StorE Function Read Out Data, Configure Parameters PC Function Page 6.4 Menus Overview 7 Menu Item Descriptions 7.1 Set Sampling Rate rAtE 7.2 Set Hysteresis HYSt 7.3 Trigger Settings triG Start Recording as of the Trigger Event (without re-trigger or pre-trigger) Multiple Recordings as of the Trigger Event (with re-trigger) Recording Before the Trigger Event, or Immediate Recording (with pre-trigger) Disabling the Trigger Enabling the Trigger - Select Level (HI, LO) and Type (out, in, st-ou, st-in) Start Recording at a Selected Point in Time and then Activate the Trigger (t.time) 7.4 Recording: Duration and Type durA, CYCLE Recording without Time Limits durA Time-Limited Recording durA Cyclical Recording CYCLE Re cord Until Memory is Full CYCLE 7.5 Internal Time timE Set Current Weekday and Time (no date) 7.7 Set Transmission Speed bAud-ou, bAud-in Set Transmission Speed to the PC bAud-ou Set Transmission Speed to the Multimeter bAud-in 7.8 Start / Interrupt / Stop Data Recording StorE, LAbEL Start Data Recording (StorE mode) Start manual data recording: Interrupt Data Recording Stop Data Recording (StorE mode) 7.9 View Data at the Adapter reCAll Statistical Overview of Stored Data View Individual, Recorded Measurement Values View Primary Values from within a Memory Block 7.10 Reading Out Data from the Adapter at the PC / Parameter Configurations PC 7.11 Live Measurement Data Transmission from the Multimeter to the PC onlinE 7.12 Clear the Memory CLEAr 7.13 Query General Information inFo Display Current Weekday and Time LCD Test Internal Memory Test 8 METRAwin10 8.1 Installing METRAwin10 8.2 Program Documentation / Online Help 8.3 Starting METRAwin10 9 Memory Adapter Technical Data Supported Measuring Instruments Operating Elements and Operation Memory Real-Time Clock Interface Power Supply: Electrical Safety EMC Temperature Range / Climatic Category Mechanical Design 10 Repair and Replacement Parts Service DKD Calibration Lab and Rental Instrument Service 11 Product Support