settInG the CLoCk

settInG the CLoCk usInG InteLL set™

1.Plug the attached AC Cord into an AC power source.

2.The time will automatically be set to Eastern Standard Time.

3.Press and hold the time Zone Button, located on the back of the unit.

4.While holding the time Zone Button, press the MIn Button to adjust the current time zone.

Refer to the Time Zone Chart to find your specific time zone.

ManuaLLy settInG the CLoCk

1.Press and hold the time Button.

2.While holding the time Button, press the hr Button to adjust the hour, and the MIn Button to adjust the minute.

A PM Indicator Light will illuminate green when the time is in the PM.

3.After the correct time is set, release the time Button to finish setting the clock.

 

ControLs

oPeratIons

 

abbr.

a-1

AST

ADT

 

a-2

EST

EDT

 

a-3

CST

CDT

 

a-4

MST

MDT

 

a-5

PST

PDT

 

a-6

AKST

AKDT

 

a-7

HAST

HADT

 

 

 

 

 

 

 

 

 

 

 

 

 

Full name

 

 

 

 

time Zone

 

 

Atlantic Standard Time

 

 

 

UTC - 4 hours

 

 

Atlantic Daylight Time

 

 

 

UTC - 3 hours

 

 

Estern Standard Time

 

 

 

UTC - 5 hours

 

 

Eastern Daylight Time

 

 

 

UTC - 4 hours

 

 

Central Standard Time

 

 

 

UTC - 6 hours

 

 

Central Daylight Time

 

 

 

UTC - 5 hours

 

 

Mountain Standard Time

 

 

 

UTC - 7 hours

 

 

Mountain Daylight Time

 

 

 

UTC - 6 hours

 

 

Pacific Standard Time

 

 

 

UTC - 8 hours

 

 

Pacific Daylight Time

 

 

 

UTC - 7 hours

 

 

Alaska Standard Time

 

 

 

UTC - 9 hours

 

 

Alaska Daylight Time

 

 

 

UTC - 8 hours

 

 

Hawaii-Aleutian Standard Time

 

 

 

UTC - 10 hours

 

 

Hawaii-Aleutian Daylight Time

 

 

 

UTC - 9 hours

 

 

settInG the aLarM

1.Press and hold the aL Button.

2.While holding the aL Button, press the hr Button to adjust the hour, and the MIn Button to adjust the minute.

A PM Indicator Light will illuminate green when the time is in the PM.

3.While continuing to hold the aL Button, press the aL Mode Button to set the alarm mode to BU (Buzzer), RU (Radio), or Off.

4.After the correct time is set, release the aL Button to finish setting the alarm.

After the alarm sounds, press the snooze Button to delay the alarm for an additional 9 minutes.

After the alarm sounds, press the Power/aL off Button to turn the alarm off until the set alarm time is reached again.

settInG the sLeeP tIMer

1.Press and hold the sleep Button.

2.While holding the sleep Button, press the hr Button to increase the hour, and the MIn Button to decrease the minutes.

The maximum sleep time is 1 hour 59 minutes.

3.After the sleep time is set, release the sleep Button to finish setting the sleep timer.

At anytime, you can check the remaining sleep time by pressing and holding the Sleep Button.

tunInG the aM/FM raDIo

1.Press the Power/aL off Button to turn the radio on.

Turn the volume up to see if the unit is turned on or off. If static or the radio plays, then the unit is turned on, if not, then the unit is powered off.

2.Adjust the FM/aM switch to AM or FM.

3.Turn the tuning Dial to the desired station.

Turn the volume Dial adjust the volume of the unit.

To set the sleep timer when in Radio Mode, follow the “Setting the Sleep Timer” instructions.

When the Auxiliary Input is connected to an Audio Source, that source will override the radio.

usInG the auxILIary InPut

1.Plug an MP3 Player or other Audio Source into the auxiliary Input on the back of the unit.

2.Press the Power/aL off Button to turn the unit on.

Turn the volume up to see if the unit is turned on or off. If static, the radio, or the connected audio source plays, then the unit is turned on, if not, then the unit is powered off.

When the Auxiliary Input is connected to an Audio Source, that source will override the radio.

1

2

3

4

5

6

7

8

9

10

ControL GLossary

01.sleep Button

Press the Sleep Button to adjust the sleep timer.

02.Power/aL off Button

Press the Power Button to turn the unit on.

After the alarm sounds, press the Power/aL off Button to turn the alarm off until the set alarm time is reached again

03.volume Dial

Turn the Volume Dial to adjust the volume of the unit.

04.time Button

Press the Time Button to adjust the unit’s time.

05.hr Button

Press the HR Button to adjust the hour of the time or alarm.

06.snooze Button

After the alarm sounds, press the Snooze Button to delay the alarm for an additional 9 minutes.

07.MIn Button

Press the MIN Button to adjust the minute of the time or alarm.

While holding the time Zone Button, press the MIn

Button to adjust the current time zone.

08.FM/aM switch

Adjust the FM/AM Switch to select FM or AM radio.

09.time Zone Button

Press the Time Zone Button to adjust the time zone.

10.auxiliary Input

Use the Auxiliary Input to connect an MP3 player or other audio source to the unit.

11

12

13

14

15

16

17

11.Dimmer Button

Press the Dimmer Button to adjust the brightness of the LED display

12.aL Button

Press the AL Button to set the alarm time.

13.tuning Dial

Turn the Tuning Dial to adjust the FM or AM radio station.

14.aL Mode Button

Press the AL Mode Button to set the alarm mode to BU (Buzzer), RU (Radio), or Off.

15.Dst switch

Adjust the DST Switch to “On” during Daylight Savings Time to adjust the clock forward an hour.

Adjust the DST Switch to “Off” at the end of Daylight Savings Time to adjust the clock back an hour.

16.FM wire antenna

Adjust the FM Wire Antenna to improve the FM radio reception.

An AM Antenna is built into the unit. Adjust the position of the unit to improve AM radio reception.

17.aC Cord

Use the attached AC Cord to connect the unit to an AC power source.

C209.indd 2

3/13/2009 12:12:48 AM

Page 2
Image 2
GPX C209B important safety instructions SettInG the CLoCk, ControLs, OPeratIons, ControL GLossary