Preparation
11
Helpline Tel. No.: U.K. 08700 100 076 R.O.I. 01289 8333
Note:
LActual battery performance depends on a
combination of how often the handset is in
use (talking) and how often it is not in use
(standby).
LBattery operating time may be shortened
over time depending on usage conditions
and ambient temperature.
Battery replacement
If 7 flashes even when the handset
battery has been fully charged, the battery
must be replaced.
Important:
LPlease use only the Panasonic battery
noted on page 3.
LUse only a rechargeable battery. If you
install a non-rechargeable battery and
start charging, the battery may leak
electrolyte.
1Press the notch on the cover firmly and
slide it in the direction of the arrow.
2Remove the old battery and install the
new one. See page 10 for battery
installation.
Turning the power on/off
Power on
Press {ih} for about 1 second.
LThe display will change to the standby
mode.
Power off
Press {ih} for about 2 seconds.
LThe display will go blank.
Setting the date and time
Important:
LConfirm that the AC adaptors are
connected.
LEnsure that w is not flashing.
1Press $ (centre of joystick).
2Select t, then press , 2 times.
3Enter the current day, month and year by
selecting 2 digits for each.
Example:17 May, 2004
Press {1}{7}{0}{5}{0}{4}.
LIf you make a mistake, use the joystick
to move the cursor, then make the
correction.
4Enter the current hour and minute by
selecting 2 digits for each.
5Press / repeatedly to select 12- or
24-hour time entry.
L24-hour time entry is selected when
neither “AM” nor “PM” are displayed.
Example:3:3 0 PM
Press {0}{3}{3}{0}, then press /
repeatedly until “03:30 PM” is
displayed.
6Press ,.
7Press {ih}.
Operation Operating time
While in use (talking) 17 hours max.
While not in use
(standby)
270 hours max.