Useful Telephone Settings
32 Helpline Tel. No.: U.K. 08700 100 076 R.O.I. 01289 8333
8Press {ih}.
Setting call restriction
You can restrict selected handsets from
dialling certain numbers. You can assign up
to 6 phone numbers to be restricted, and
select which handsets will be restricted.
Storing area codes here will prevent the
restricted handsets from dialling any phone
number in that area code. If a restricted
number is dialled, the call will not be
connected and the restricted number will
flash on the display.
1Press $ (centre of joystick).
2Select u, then press ,.
3Enter “0000” (default base unit PIN).
LIf you changed the PIN, enter it (page
32).
4Select “Call Option”, then press
,.
5Select “Call Restricted”, then
press ,.
6Set which handsets will be restricted by
selecting the handset then pressing
?.
LRestricted handsets have a Q next to
them.
LTo turn call restriction off for a
handset, select the restricted handset,
then press ?.
7Press ,.
8Select a memory location, then press
,.
LPreviously stored phone numbers are
displayed.
9Enter the phone number or area code to
be restricted (8 digits max.), then press
,.
LTo erase a restricted number, press
{C}.
10 Press {ih}.
Other options
Changing the base unit PIN (personal
identification number)
For security, the base unit PIN must be
entered when changing certain settings. The
default PIN is “0000”.
Important:
LIf you change the PIN, please make note
of your new PIN. The unit will not reveal
the PIN to you. If you forget your PIN,
consult your nearest Panasonic service
centre.
1Press $ (centre of joystick).
2Select u, then press ,.
3Enter “0000” (default base unit PIN).
LIf you changed the PIN, enter it.
4Select “Other Option”, then press
, 2 times.
5Enter the new 4-digit base unit PIN.
6Enter the new 4-digit base unit PIN
again.
7Press {ih}.
Resetting the base unit to its default
settings
1Press $ (centre of joystick).
2Select u, then press ,.
3Enter “0000” (default base unit PIN).
LIf you changed the PIN, enter it (page
32).
4Select “Other Option”, then press
,.
5Select “Reset Base”, then press ,.
6Select “Yes”, then press ,.
7Press {ih}.
Note:
LThe following items will be deleted or reset
to their default settings:
– Settings listed on page 30, 38, 46