Auto PM Channel Storing, Press CALL+ Power on

AUTO PM CHANNEL STORING

After you recalled a PM channel, this function automatically overwrites the current PM channel with the present operating environment when:

•You recall another PM channel.

•You press [PM], [VFO].

•You switch OFF the transceiver.

Use the following procedures to activate this function:

1Press [MNU] to enter Menu mode.

2Select Menu No. 4 (Memory).

CALL

PWR

VOLSQL

3Press [s], then select Item No. 4 (PM Auto Store).

CALL

PWR

VOLSQL

4Press [SET] to toggle the function ON or OFF (default).

5Press [MNU] again to exit Menu mode.

RESETTING PROGRAMMABLE MEMORY

Use this procedure to reset the PM channels to the factory defaults.

1Press [CALL]+ POWER ON.

•A confirmation message appears. ("PM Reset? Press [CALL]")

•To quit resetting, press any key other than [CALL].

2Press [CALL] again.

20 21

Page 45

Image 45

Kenwood TM-V7A Auto PM Channel Storing, Resetting Programmable Memory, Press s, then select Item No PM Auto Store

TM-V7A specifications

The Kenwood TM-V7A is a sophisticated dual-band transceiver that has garnered the attention of amateur radio enthusiasts worldwide. Designed for VHF and UHF operations, it offers a plethora of features that enhance communication capabilities and provide a robust user experience.

One of the standout characteristics of the TM-V7A is its dual-vfo (variable frequency oscillator) configuration, which allows users to monitor two frequencies simultaneously. This feature is particularly useful for coordinating communications across different bands or for listening to two channels at once. The large, bright LCD display provides clear visibility of the operating frequency, with the ability to monitor a wealth of information, including received signal strength and battery voltage.

The TM-V7A supports a wide range of operating modes, including FM, AM, and SSB, making it versatile enough for different communication needs. The device is compatible with CTCSS (Continuous Tone-Coded Squelch System) and DCS (Digital-Coded Squelch), which adds significant convenience for group communications by reducing unwanted noise and interference.

Another important feature is its built-in APRS (Automatic Packet Reporting System) functionality. This allows operators to transmit their position automatically and share information with other APRS users. The built-in GPS capability enhances this feature, providing accurate location tracking that can be particularly beneficial during emergency response situations or for outdoor events.

For enhanced audio quality, the TM-V7A is equipped with a high-performance audio filter and variable bandwidth control. This allows operators to tailor the audio output based on the conditions of the band and personal preferences, improving clarity and intelligibility during conversations.

The transceiver is also designed with user-friendly navigation. The intuitive menu system enables easy access to settings and configurations, allowing operators of all experience levels to operate the radio effectively. Customization options further enhance user experience, with programmable memories allowing operators to save frequently used frequencies and settings.

The Kenwood TM-V7A’s rugged build quality ensures durability, making it suitable for both home and field operations. Its compact design allows for easy installation in vehicles or portable setups, making it an excellent choice for both casual users and serious amateur radio operators. Overall, the Kenwood TM-V7A stands out as a feature-rich transceiver capable of meeting the diverse needs of the amateur radio community, combining advanced technology with practical functionality.

Contents

TM-V7A Features Thank YOUModels Covered by this Manual One or more of the following statements may be applicable When condensation occurs inside the transceiver Contents Selecting the Number of Channels Using Visual Scan Partial Reset VFO Full Reset MemorySetting Scan Limits Using Program Scan Selecting Scan Resume Method 1200/ 9600 bps Operation Data Connector Pin Functions Transceiver Lock All LockSquelch Hang Time Conventions Followed in this Manual Supplied Accessories Installation Example Mobile InstallationInstallation Steps Preparation for Mobile and Fixed Station Operation Mobile Operation DC Power Cable Connection PS-33 20.5 A, 25% duty cycle Fixed Station Operation Antenna Connection Transceiver 15 a Supplied Accessory 20 a DC Power CableReplacing Fuses Fuse Location Fuse Current Rating Packet Equipment Connections Accessory ConnectionsExternal Speakers Microphone Ewweww Your First QSO Basic Transceiver Modes Getting Acquainted Control Band TX-Band Front Panel Tone button Function buttonREV button LOW button Rear Panel 3MNU button Selects the Menu mode Microphone Indicators Function Index Transceiver GuideVFO Scan Transmit Stored To exit Guide mode, press MNU again Selecting a Band Adjusting Volume Switching Power ON/OFF Adjusting SquelchPress Band SEL to select the VHF or UHF band Turn the VOL control clockwise to increase the audio level Tuning Control Selecting FrequenciesMicrophone UP/DWN Buttons When you finish speaking, release Mic PTT Selecting Output PowerHigh Medium Low No Indicator Transmitting What is a MENU? Menu AccessSelect the desired band Description Selections Menu ConfigurationMulti-function Button Label See reference Memory Channel Lockout Item No Description Selections Default Compared to simplex communication, you can usually Operating Through Repeaters+600 kHz +5 MHz +1.6 MHz Not applicable Simplex Selecting Offset Direction Activating Tone Function Selecting Offset Frequency Freq Selecting a Tone Frequency This complies with the standard Arrl band plan Automatic Repeater Offset A./ Canada/ Europe OnlyEuropean versions Press s, then select Item No Auto Offset To cancel ASC, press REV Reverse FunctionAutomatic Simplex Checker ASC Simplex or Split Memory CHANNEL? Memory ChannelsParameter Simplex Split Channel VHF Band UHF Band VHF/UHF Memory Channel RatioPress SET, then select the desired ratio Press SET again Storing Data in Simplex Channels Storing Data in Split Channels31, or the Call channel Recalling Memory Channels Press MHz+ Power onClearing Memory Channels Press MR again Naming Memory Channels Changing Call Channel Contents Simplex Call ChannelRecalling the Call Channel Channel Display Function Changing Call Channel Contents Split Partial Reset VFO Full Reset MemoryInitializing Memory Programmable Information Programmable Memory PM Transceiver default environment. You will not lose SolutionContents of any memory channels Application Examples Confirm that the following conditions have been Satisfied Storing Data in PM ChannelsPress 1 to 4 corresponding to the desired PM channel Press 1 to 4 corresponding to the desired PM Channel Press CALL+ Power on Resetting Programmable MemoryAuto PM Channel Storing Press s, then select Item No PM Auto Store Scan Type Scan Range Scan Selecting the Number of Channels Visual Scan Using Visual Scan Selecting Scan Resume Method Scan Resume Methods Memory Scan VFO Scan allows you to scan all frequencies fromCurrent frequency step size is used Press SET to toggle Lockout on or OFF default Locking Out Memory ChannelsPress s, then select item No Lock Out Program Scan Setting Scan Limits MHz Scan Using Program Scan CALL/VFO Scan When you are called Using CtcssWhen you make a call Press and hold Mic PTT Continuous Tone Coded Squelch System Ctcss Storing Dtss Codes Dual Tone Squelch System DtssPress s Repeat Steps 4 and 5 to select the second and third When you make a call Using DtssSelect the appropriate Dtss code Press and hold Mic PTT to transmit your Dtss code Press s, then select Item No CSQ Delay Press MNU to enter Menu mode Select Menu No Code SquelchPress MNU again to exit Menu mode Dtss and Repeaters Communication Network Example Code MemoryMember Ch. a 222 333 444 789 15 4 Use the Tuning To switch Page OFF, press F, DtssStoring page Codes Channel a Control or Mic UP/DWN to select Receiving Calling Dtss and Repeaters page 52. This setting is Locking OUT page CodesShared with Dtss Press s, then select Item No PAG Cancel Auto page CancelAnswer Back U.S.A./ Canada only Press s, then select Item No Answer Back Dual Tone MULTI-FREQUENCY Dtmf Functions Autopatch U.S.A. and CanadaMic Keypad Confirmation Tones Press SET to complete setting Press MNU to enter Menu mode Select Menu No Dtmf Memory Transmitting Stored Dtmf Numbers Confirming Stored Dtmf NumbersPress Mic PTT + PF Press Mic 0 to 9 to select the desired channel Press MNU to enter Menu mode Select Menu No APO TIME-OUT Timer TOTPress SET to toggle the function on or OFF default Auxiliary Functions Advanced Intercept Point AIP C. will temporarily switch the RX only band to the TXBand. This function allows you to reply to a caller without Manually selecting the correct band Dual Band RX ConfigurationVHF and UHF VHF or UHF VHF and VHF UHF and UHF Programmable VFO Switching AM/FM Mode Some Versions only 10, 15, 20 or 50 kHz 25, 12.5 or 25 kHz Changing Frequency Step SizeDisplayed Frequency 00, 05, 10 20, 25, 30 40, 45, 50 60, 65, 70 80, 85, 90 Press s, then select Item No Beep Volume Changing Beep VolumeLabels after Pressing F Press s, then select Item No Transceiver Lock LockAll Lock Press F, MHz to toggle Transceiver Lock on or OFF Squelch Hang Time Meter Squelch Display Demonstration Mode POWER-ON MessagePress s, then select Item No Power On Msg Press VFO Changing Display Conditions Display DimmerAuto Dimmer Change Press SET to toggle Negative default or Positive Press s , then select Item No Reverse ModeDisplay Contrast Positive/Negative Reversal Configuring Program Function Keys Default Function+ Mic KEY PWR switch Tuning control VOL control SQL control Monitor User SettingEnter Voice Operating Frequency Entry Keypad Direct EntryUse the Mic keypad to enter the desired frequency 12.5 62.5 37.5 87.5 Memory Channel Number Entry Tone Frequency Number EntryUse the Mic keypad to enter 2 or 3 digits VOL SQL Microphone Control Key Function Squelch Adjustment2Key Key Function Press s, then select Item No Mic Control Activating Microphone Control Connect this transceiver to your personal computer via a Packet Operation1200 bps 9600 bps Pin Function Data Connector Pin Functions CROSS-BAND Repeater Repeater Function U.S.A./ Canada onlyLOCKED-BAND Repeater TX Hold VS-3 Voice Synthesizer Optional Key Pressed New Mode AnnouncementCall Channel Programmable Memory MenuPage Replace the upper cover 5 screws Installing Options When the release switch clicks, the front panel is secured DFK-3C Installation Examples Service MaintenanceService Note Cleaning Problem Probable Cause Corrective Action Troubleshooting Securely to the main unit by using the same PTT General Specifications Receiver Transmitter Index

Kenwood TM-V7A Auto PM Channel Storing, Resetting Programmable Memory, Press CALL+ Power on

Models: TM-V7A