Kenwood TM-V7A instruction manual VHF/UHF Memory Channel Ratio, VHF Band UHF Band, Press SET again

VHF/UHF MEMORY CHANNEL RATIO

You can change the ratio of memory channels between the VHF and UHF bands, from the factory default (90 channels each). Changing the ratio requires all memory channels to be cleared. So decide the appropriate ratio before storing data in memory channels.

The selectable ratios are as shown below:

VHF Band	UHF Band	Memory Channel
		Name
90	90	Yes
110	70	Yes
130	50	Yes
50	130	Yes
70	110	Yes
140	140	N/A

Yes: Memory channel name programmable

N/A: Not applicable

1Press [MNU] to enter Menu mode.

2Select Menu No. 4 (Memory).

CALL PWR

VOLSQL

3Press [s], then select item No. 2 (Channel Ratio).

			1
	CALL	PWR
			2
	VOL	SQL	3
	2		4
	1
4 Press [SET], then select the desired ratio.			5
			6
	CALL	PWR
			7
	VOL	SQL	8
	2		9
	1
5	Press [SET] again.		10
	• A confirmation message appears.		11
	• To quit changing the ratio, press [CLR].		12
6 Press [SET] once again.			13
	• The memory channels are cleared and the ratio is changed.
			14
	• The previous mode is restored.
			15
			16
			17
			18
			19
			20
			21

29