Kenwood TM-V7A Changing Beep Volume, Labels after Pressing F, Press s, then select Item No

CHANGING MULTI-FUNCTION BUTTON LABELS

1

This transceiver shows button labels on the lower portion of

2 the display. You can also change the default configuration to one of the following types. Select the configuration

3 depending on which functions you use most frequently.

4	Basic State Display Labels	Labels after Pressing [F]
5	[F] [TONE] [DTSS] [LOW]	[OFF] [SHIFT] [REV] [VISUAL]
6		or
7	Basic State Display Labels	Labels after Pressing [F]
	[F] [VISUAL] [REV] [LOW]	[OFF] [TONE] [SHIFT] [DTSS]

8

Note:

9◆ The labels that appear after pressing [F] (1 s) are identical no matter which configuration you select.

10	◆ After selecting the F/TONE/DTSS/LOW configuration, press
	[F], [REV] (1 s) to activate ASC {page 27} and press [F], [REV] to
11	cancel the function.

◆After selecting the F/VISUAL/REV/LOW configuration, press

CHANGING BEEP VOLUME

The transceiver beeps each time you press a button or a microphone key. You can change the beep volume or turn it off.

1Press [MNU] to enter Menu mode.

2Select Menu No. 14 (Audio).

CALL PWR

VOLSQL

3Press [s], then select Item No. 1 (Beep Volume).

CALL PWR

12		[F], [TONE] (1 s) to activate Automatic Tone Frequency ID {page 49}
		and press any key to cancel the function.
13	1	Press [MNU] to enter Menu mode.
14	2	Select Menu No. 2 (Front Panel).

2 1

VOLSQL

15 3 Press [s], then select Item No. 3.

16	CALL	PWR
17
18	VOL	SQL

4Press [SET], then select the volume from level 1 (min.) to 7 (max.) and OFF. The default is level 5.

CALL PWR

	2
19	1

2 1

VOLSQL

4Press [SET] repeatedly until the desired configuration

20

appears.

215 Press [MNU] again to exit Menu mode.

5Press [MNU] again to exit Menu mode.

66