Prestige 480 Dual BRI ISDN Router

When the Menu 23.1- System Security -Change Password appears, as shown in the next figure , type in

your existing default system password, i.e., 1234, and press [Enter].

Menu 23.1 – System Security - Change Password

Old Password= ?

New Password= ?

Retype to confirm= ?

Enter here to CONFIRM or ESC to CANCEL:

Figure 2-7 Menu 23.1 - System Security - Change Password

Step 3. Enter your new system password and press [Enter].

Step 4. Re-type your new system password for confirmation and press [Enter]. Note that as you type a password, the screen displays an (*) for each character you type.

2.9Resetting the Prestige

If you have forgotten your password or for some reason cannot access the SMT menu you will need to reinstall the configuration file. Uploading the configuration file replaces the current configuration file with the default configuration file. This means that you will lose all configurations that you had before and the speed of the console port will be reset to the default of 9600 bps with 8 data bit, no parity and 1 stop bit (8n1). The password will be reset to the default of 1234, also.

Download the "romfile.zip" file from the Internet, unzip it and save it in a folder. Turn off the Prestige and

begin a Telnet session with the default console port settings.

Hardware Installation and Setup

2-9

Page 49
Image 49
ZyXEL Communications 480 manual Resetting the Prestige, Menu 23.1 System Security Change Password