ZyXEL Communications 480 manual System Maintenance Status Menu Fields, System Maintenance 13-3

Prestige 480 Dual BRI ISDN Router

If you enter 9 in the Press Command field you will see the following menu:

		Menu 24.1 - System			Maintenance - Status				09:59:41
								Fri. May.	28, 1999
ISDN	Chan	Status	Speed	TxPkts	RxPkts	Errors	CLU	ALU	Up Time
--	--	Down	0kbps	0	0	0	0%	0%	0:00:00
--	--	Down	0kbps	0	0	0	0%	0%	0:00:00
--	--	Down	0kbps	0	0	0	0%	0%	0.00.00
--	--	Down	0kbps	0	0	0	0%	0%	0.00.00
ISDN	Chan	Own	IP	Own CLID		Peer IP		Peer CLID
--	--
--	--
--	--
--	--
	Total Outcall Time:		0:00:00		CPU Load = 7.92%
				Press Command:
COMMANDS: 1 -Drop ISDN_1 B1 2-Drop ISDN_1					B2 3-Drop ISDN_2 B1		4-Drop ISDN_2 B2
	5-Reset Counters 6-Drop All				9-Toggle Status		ESC-Exit

Figure 13-3 Menu 24.1 after Toggle Status

The following table describes the fields present in Menu 24.1 - System Maintenance - Status . It should be noted that these fields are READ-ONLY and are meant to be used for diagnostic purposes.

	Table 13-1 System Maintenance - Status Menu Fields
Field	Description
ISDN	Shows which ISDN line(s) is in use.
Chan	Shows statistics for B1 and B2 channels respectively. This is the information
	displayed for each channel:
Status	Shows the status of the ISDN Channel.
	LCP UP indicates that PPP negotiation is taking place. If the negotiation is
	successful the ISDN Channel is connected to a Remote Node, otherwise the
	connection is Down. Idle, Dial and Answering refer to the status of the ISDN
	channel.

System Maintenance 13-3