ZyXEL Communications 480 manual Chapter Hardware Installation & Initial Setup, Front Panel LEDs

Prestige 480 Dual BRI ISDN Router

Chapter 2

Hardware Installation & Initial Setup

This chapter shows you how to make the cable connections to your Prestige as well as set up your ISDN connection using the SMT.

2.1Front Panel LEDs

The LED indicators on the front panel indicate the router functional status of the Prestige. The following table describes the LED functions:

		Figure 2-1 Front Panel
		Table 2-1 LED Functions
Field		Description
PWR		The PWR (power) LED is on when power is applied to the Prestige.
SYS		The SYS (System) LED is on when the system is running normally, and off when the
		system is not ready or failed. It flashes when the system is rebooting.
LAN	10M	This green LED is on when the 10M Ethernet is connected and ready and off when
		the 10M Ethernet is not ready or failed. This LED flashes when the Prestige is
		sending or receiving packets.
100M		This orange LED is on when the 100M Ethernet is connected and ready and off
		when the 100M Ethernet is not ready or failed. This LED flashes when the Prestige
		is sending or receiving packets.

Hardware Installation and Setup 2-1