ZyXEL Communications 480 manual Yes then, 64k

Prestige 480 Dual BRI ISDN Router

		This field determines whether or not your Prestige will call back
		after receiving a call from this remote node.
		If this option is enabled, your Prestige will disconnect the initial
		call from this node and call it back at the Outgoing Primary
		Phone Number (see below).
Outgoing:	My Login	This is a required field [?] if Call Direction is either Both or
	Name	Outgoing. Enter the login name for your Prestige when it calls
		this remote node.
Outgoing:	My	This is a required field [?] if Call Direction is either Both or
	Password	Outgoing. Enter the password for your Prestige when it calls this
		remote node.
Outgoing:	Authen	This field sets the authentication protocol used for outgoing calls.
		Options for this field are:
		CHAP/PAP - Your Prestige will accept either CHAP or PAP	CHAP/ PAP
		when requested by this remote node.
		CHAP - accept CHAP only.	CHAP
		PAP - accept PAP only.	PAP
Outgoing:	Pri(mary)	Your Prestige always calls this remote node using the Primary
	Sec(onda	Phone number first for a dial-up line.
	ry) Phone	If the Primary Phone number is busy or does not answer, your
	Numbers
		Prestige will dial the Secondary Phone number if available.
		Some areas require dialing the pound sign # before the phone
		number for local calls. A # symbol may be included at the
		beginning of the phone numbers as required.
Edit PPP Options		To edit the PPP options for this remote node, move the cursor to	Press space
		this field, use the space bar to select Yes and press [Enter]. This	bar to toggle
		will bring you to Menu 11.2 - Remote Node PPP Options. For	Yes then
		more information on configuring PPP options, see the section	press
		Editing PPP Options.	[Enter]
Rem IP Addr		Enter the IP address of the remote gateway.
Telco Options:
Allocated Budget (min)		This field sets a ceiling for outgoing call time for this remote	Default = 0
		node. The default for this field is 0 for no budget control.
Period (hr)		This field sets the time interval to reset the above outgoing call
		budget control.
Transfer Type		This field specifies the type of connection between the Prestige	64k/

4-4 Remote Node Configuration