ZyXEL Communications 480 manual Filtering Remote Node traffic

Prestige 480 Dual BRI ISDN Router

Menu 11.5 - Remote Node Filter

Input Filter Sets:

protocol filters=

device filters=

Output Filter Sets:

Factory

Default

Filter

Figure 9-11 Filtering Remote Node traffic

9.4.3 Default Dial-in Filter

Use Menu 13.1 Default Dial-in Filter to specify the filter set(s) to apply to the incoming and outgoing traffic between all dial-in users and your Prestige. Note that these filter set(s) only apply to the dial-in users but not to the remote nodes. You can specify up to 4 filter sets separated by a comma, e.g., 1, 5, 9, 12, in each filter field. The default is no filters.

Menu 13.1 - Default Dial-in Filter

Input Filter Sets: protocol filters=

device filters=

Figure 9-12 Default Dial-in Filter

Filter Configuration 9-17