ZyXEL Communications 480 manual Command Interpreter Mode, Call Control, System Maintenance 13-17

Prestige 480 Dual BRI ISDN Router

13.5 Command Interpreter Mode

This option allows you to enter the command interpreter mode(CI). A list of valid commands can be found by typing [help] at the command prompt. For more detailed information, check your PNC installation disc or

Enter Menu Selection Number: 8

Copyright (c) 1994 - 1999 ZyXEL Communications Corp.

ras>	?
Valid commands are:
sys	exit	ether	isdn
ip

visit the ZyXEL Web site or send e-mail to the ZyXEL Support Group.

Figure 13-13 Command Mode

13.6 Call Control

The Prestige provides four call control functions: call control parameters, blacklist, budget management and call history.

Call control parameters allows you to set a dial out time limit, the number of times a number should be called before it is added to the blacklist and the interim between calls.

The budget management function allows you to set a limit on the total outgoing call time of the Prestige over a period of time. When the total outgoing call time exceeds the limit, the current call will be dropped and any future outgoing calls will be blocked.

The blacklist function prevents the Prestige from re -dialing to an unreachable phone number. It is a list of phone numbers, up to a maximum of 14, to which the Prestige will not make an outgoing call. If the Prestige tries to dial to a phone number and fails a certain number of times (configurable in Menu 24.9.1), then the

System Maintenance 13-17