ZyXEL Communications 480 manual LAN-to-LAN Server Application, Remote Network Local Network

Prestige 480 Dual BRI ISDN Router

8.2LAN-to-LAN Server Application

Your Prestige can also be used as a dial-in server for LAN-to-LAN application to provide access for the workstations on a remote network. For your Prestige to be set up as a LAN-to-LAN server, you need to configure the Default Dial-In Setup to set the operational parameters for incoming calls. Additionally, you must create a remote node for the router on the remote network (see Chapter 5 - Remote Node Configuration).

An example of your Prestige being used as a LAN-to-LAN server is shown next.

Remote Network Local Network

LAN-to-LAN

Server

ISDN

Prestige 480 Prestige 480

Figure 8-2 Example of a LAN-to-LAN Server Application

Dial-In Server Configuration 8-3