ZyXEL Communications 480 manual Menu 12.3 Bridge Static Route Setup

Prestige 480 Dual BRI ISDN Router

Timeout (min)

retain the Ethernet Addr information in its internal tables while the line is down. If this information is retained, your Prestige will not have to recompile the tables when the line is brought back up.

Once you have completed filling in the Network Layer Options Menu, press [Enter] to return to Menu 11.1. Then press [Enter] at the message [Press ENTER to Confirm…] to save your configuration, or press [Esc] to cancel.

Menu 12.3 - Bridge Static Route Setup

1.________

2.________

3.________

4.________

Enter selection number:

7.3Bridge Static Route Setup

Similar to network layer static routes, a bridging static route tells the Prestige about the route to a node before a connection is established. You configure bridge static routes in Menu 12.3.1, by pressing 3 in menu 12 and then selecting one of the bridge static routes as shown next.

Menu 12.3 - Bridge Static Route Setup

Menu 12.3.1 - Edit Bridge Static Route

Route #: 1

Route Name= ?

Active= No

Ether Address= ?

IP Subnet Mask=

Gateway IP = 1

Press ENTER to CONFIRM or ESC to CANCEL:

7-4 Bridging Setup