ZyXEL Communications 480 manual IPX Spoofing, IPX Ethernet Setup, Prestige on LAN without Server

Prestige 480 Dual BRI ISDN Router

6.2.2 Prestige on LAN without Server

Each IPX network must have a seed router. If you only have NetWare clients on your network, then you must configure the Prestige as a seed router and set up unique network numbers for each frame type enabled using the Ethernet Setup Menu.

6.3IPX Spoofing

Your Prestige comes with several pre -defined call filters designed to prevent certain IPX packets from triggering a call to a remote node.

The built-in call filters are defined as follows:

•Block periodical RIP (Routing Information Protocol) and SAP (Service Advertising Protocol) response messages.

•Block NetWare serialization packets.

•Allow SAP and RIP inquiry packets.

6.4IPX Ethernet Setup

From Menu 3 - Ethernet Setup, select option Novell IPX Setup to go to Menu 3.3 - Novell IPX Ethernet

Setup as shown in the next figure.

Menu 3.3 - Novell IPX Ethernet Setup

Seed Router= No

Frame Type 802.2= Yes

IPX Network #= N/A

Frame Type 802.3= No

IPX Network #= N/A

Frame Type Ethernet II= No

IPX Network #= N/A

Frame Type SNAP= No

IPX Network #= N/A

Enter here to CONFIRM or ESC to CANCEL:

Press Space Bar to Toggle.

6-4 IPX Configuration