ZyXEL Communications 480 manual IP Routing Policy Menu Fields, IP Policy Routing 15-5, Care

Prestige 480 Dual BRI ISDN Router

	Menu 25.1.1 - IP Routing Policy
Policy Set Name= test
Active= Yes
Criteria:
IP Protocol	= 6
Type of Service= Normal		Packet length= 40
Precedence	= 0	Len Comp=
Source:
addr start= 1.1.1.1		end= 1.1.1.1
port start= 20		end= 20
Destination:
addr start= 2.2.2.2		end= 2.2.2.2
port start= 20		end= 20
Action= Matched
Gateway Type	= Gateway node	Gateway addr = 1.2.3.4
Type of Service= No Change		Gateway node = 2
Precedence	= No Change	Log= No
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.

	Figure 15-1 Menu 25.1.1 - IP Routing Policy
	Table 15-1 IP Routing Policy Menu Fields
Field	Description
Policy Set Name	This is the name of the policy set assigned in Menu 25 - IP Routing Policy
	Setup.
Active	Press the spacebar to select Yes to activate the policy.
Criteria
IP Protocol	IP layer 4 protocol, e.g., UDP, TCP, ICMP, etc.
Type of Service	Prioritize incoming network traffic by choosing from Don’t Care/ Normal / Min
	Delay / Max Thruput / Max Reliability.
Packet Length	Enter the length of incoming packets (in bytes). The operators in the [Len
	Comp] (next) apply to packets of this length.
Len Comp	Press the spacebar to choose from Equal / Not Equal / Less / Greater / Less
	or Equal / Greater or Equal.
Precedence	Precedence value of the incoming packet. Values range from 0 to 7 or Don’t
	Care.
Source:
addr start= /	Source IP address range from start to end.
end=
port start= /	Source port number range from start to end; applicable only for TCP/UDP.
end=

IP Policy Routing 15-5